With this Bluetooth module you can enjoy your favorite music that can be played wirelessly from a mobile phone or another Bluetooth device via the AUX connection of your factory Ford car radio with an AUX button.
Product features:
- Stream music wirelessly (A2DP), also via Spotify and Deezer. Operation takes place via the smartphone itself
- High quality Bluetooth chip. Sound transmission without distortion according to High Definition Standard
- Current stabilizer with integrated interference filter for clear sound
- LED Power Status Indicator
- Shock and interference resistant
- No loss of quality or interference (as with FM transmitters) thanks to the direct connection
- Made entirely of copper wire (winter-resistant)
- Easy installation, without damage to the original parts of the car
- Only suitable for streaming music and NOT for calling!
NB!
- There are two versions of connections to 6000 CD radios: FD and FD12P . This adapter has an FD12P connector. Adapter with an FD connector can be found here
- This cable only works with radios equipped with an AUX button on the front of the radio (not CDDJ).
The following Ford models in combination with factory 6000 CD radios with an AUX button are supported:
- Ford Focus Mk2 from 2005 onwards
- Ford C-MAX Mk1 from 2003 onwards
- Ford Mondeo Mk3 from 2003 onwards
- Ford S-MAX from 2006 onwards
- Ford Connect 2006 to 2012
- Ford Transit 2006 to 2012
- Fiesta & Fusion 2005 to 2008
The necessary port is located on the back of the radio. Cable length: 25cm.
The following keys (2x sets) can be used to disassemble the radio:
http://www.carinterface.nl/radio-demontage-hulpstuk_yt-key02
Installation:
The necessary connection is located on the back of the radio. The black 12-pin connector of this module is connected to the AUX port on the back of the radio. See images for the connector location.
If the port is occupied, usually due to AUX cable preparation, then the existing connector should be removed and connected to this module instead.
The black wire must then be connected to ground (no AUX ground/GND) and the red to the switched (interrupted via ignition lock) +12V (ACC+). Possibly to tap the radio wiring.
Please check that the AUX port on your radio visually matches the connector on this cable before placing your order!
