12-pin Bluetooth streaming / hands-free car kit adapter for MFD3, RCD 210, RCD 310, RCD 510, RNS 310, RNS 510 and RNS-E

With this Bluetooth streaming / car kit module you can enjoy your favorite music that can be played wirelessly from a mobile phone or another Bluetooth device via your original Audi / Seat / Skoda / Volkswagen car radio with active AUX functionality.
The module also has hands-free calling / car kit functionality.

Product features:

• High quality Bluetooth chip. Sound transmission without distortion according to High Definition Standard
  
• Hands-free calling / car kit (HFP)
• Music and telephony controls take place via your smartphone
• The radio must be in AUX mode to make phone calls or stream music via this module
  
• Current stabilizer with integrated interference filter for clear sound
• No loss of quality or interference (as with FM transmitters) thanks to the direct digital connection
• Completely copper wire (tinned) (winter-resistant)
• Shock and interference resistant
  
• Easy installation

If you can switch your car radio to the AUX input, then this Bluetooth interface can be used.
If this is not the case, the AUX functionality will not be activated by using this cable.
To do this, you can go to the dealer to have the AUX functionality activated (if supported by your car radio) or purchase a Yatour interface that does not require the active AUX functionality.

The necessary AUX connection is located on the back of the radio.
The following disassembly keys (2x sets for double DIN radios) can be used to disassemble the radio:

Regular cable ties can be used to connect the loose power wires (red + black) to the radio wiring.

Please note: RNS-E radio may have a different power supply pinout. See the relevant page for more information:

RNS-E Bluetooth adapter pinout

The following Audi Concert and Symphony radios from A4, A5, Q5 are also supported:

If the AUX option on the radio is currently not selectable, it must first be coded at the dealer.

Installation:

The white 12-pin connector of the Bluetooth module (interface / audio adapter) is connected to the AUX port on the back of the car radio.
The black wire of the Bluetooth module must then be connected to ground (not AUX ground!) and the red wire to the switched (interrupted via ignition lock) +12V.
Possibly to tap the radio wiring.

Please check whether the AUX port on your car radio visually matches the connector on this Bluetooth module (interface / audio adapter) before placing the order!